• EVA Extruder Pelletizing Line
  • EVA Extruder Pelletizing Line
Request a Quote
Public Project Condition
  • Public Project Condition
  • Water demand Water temperature：≤38℃
    • Industrial soft water(non-ionized water ) water temperature ≤38℃
    • Circulating water: for barrels cooling; using soft water(distilled water) to prevent scale
    • External circulating water: for cooling internal circulating water and water trough
    • Water supply suggestion: build pool 25~30m3outside of workshop and pump the water
  • Ambient condition for electric cabinet: Conductive dust free; Temperature:≤38℃
  • The full set equipment is placable on rigid flat ground, without extra base
Processing introduction
  • Machine color：main frame:gray cabinet color：computer color
  • Pelletizing craft

    automatic conveyer----Double-awl feeder---∮120 Single screw extruder---Hydraulic Screen Changer—Water cooling dia face hot cutting--- centrifugal dehydrator--- vibrator screen –Silo

Technical Parameters
  • Kneader: Customer owned
  • Auto reversing elevator : 1set
    • Feeder material motor power :2.2kw
    • Limit switch limits up and down
    • Elevator hopper is SS material,
    • Convey the material to conical double screw force feeder
  • Double-awl feeder: 1 set
    • Motor power: 11kw, using TECO frequency converter
    • Feeder screw: 2 PCS, Nitrogen & chromate treatment, burnished surface.
    • Body : polishing treatment inner side . hard chromate treatment.
    • Hopper : polishing treatment inner side . hard chromate treatment.
    • KSD-120 extruder
      • Gear box

      High torque gear box，gear box shaft apply high strength alloy steel and cementite quenching treatment ，high percision and high hardness transmission stabilization 、low noise 、high efficiency

      Main motor
      • Y2 type level 4 AC motor
      • Power:75kw
      • main motor rotation speed：1480rpm
      • Adjust Speed Method: adopting "TECO" AC frequency conversion speed
      Screw
      • Diameter:φ100mm
      • L/D:15:1
      • Applying Cold water cooling for Screw barrel
      • material is 38CrMoALA Nitrogen treatment, high temperature vacuum quench treatment;hardness:HRC60-64;Screw element is made by the surface forming grinding through machining center.
      Barrel
      • material is 38CrMoALA Nitrogen treatment, high temperature vacuum quench treatment;hardness:HRC60-64; Screw element is made by the surface forming grinding through machining center.
      • Barrel is air cooling.
      • Barrel has the protective cover.
      Heating section:adopt: use cast-AL heater
       Hydraulic pressure automatic screen exchanger:
      • screen exchanger:
        (1) Position: fixed between barrel and head
        (2) Plate filer automatic screen exchanger,Flow section for circular
        (3) Casting copper heater 2 slices.
        (4) The double location:Including two pieces of porous plate
      • hydraulic pressure station:
        (1) Oil circuit system pressure:15Mpa＜25Mpa；
        (2) Hydraulic pump output volume:4L/min
        (3) Motor rated power: 1.5 kw, Rated Speed:1420rpm
        (4) Hydraulic Oil:YA-N46
        (5) Accumulator nitrogen filled pressure:7Mpa
      Die face hot cutting head:
      • head pressure sensor device;
      • Head melting temperature sensing display device
      • Strand tooling plate: aluminum heater and a set of;
      • Interlock system
        (1). intelligent instrument, PID parameter self-regulation, heator broken circuit indication
        (2). single screw extruder head is installed with indication of melt pressure and temperature. Melt pressure is interlocked with main frame, over pressure protect.
      • Electric controlling system
        (1) 3*380v .50HZ
        (2) AC contactor :SIEMENC brand
        (3) Main motor air switch: LG brand
        (4) Intermediate relay：OMRON brand
        (5) Temperature controller:OMRON brand
        (6) Other low voltage electrical and button, switch: all use the French Schneider
        (7) Electric control cabinet include temperature control system and driving system
      • Die face water-ring hot cutting auxiliary system
        (1) Water-ring hot cutting pelletizer:2.2kw, one set;
        Adjust Speed Method: adopting "TECO" AC frequency conversion speed
        (2) Hot cutting cover: Stainless steel. 1pc
        (3) Water pump:one set,power: 5.5kw
        (4) Diversion trench: stainless steel material,1PC
        (5) Centrifugal dehydrator:one set,4kw
        (6) vibrating screen:one set,
        (7) dyer silo:one set,including 0.75m³silo,3kw blower,adoptφ160 soft pipe.
        • Spare parts and tools
        • input oil seal:1 set
        • internal Hexagon wrench:1 set
        • Asbestos glove:1 pair
        • hot cutting blade:10 pcs
Get in Touch
Products
View More Machines